»The STL file will need to be sliced into layers from 0.01 mm to 0.07 mm thick, depending on the build technique you choose.

»Construction of the object takes place layer by layer. The rapid technology prototyping machine builds the

This technology is accomplished by using a rapid prototyping machine. Rapid prototype machines can produce prototypes in mere hours. Depending on the complexity of the prototype, it may take anywhere from just a few hours to a few days for its completion.

Rapid technology prototyping is also commonly called solid free-form fabrication, layered manufacturing, or computer automated manufacturing.

The benefits of using rapid technology prototyping are…

»Any object of any complexity can be formed fairly easily and quickly without the need for machine setup or assembly.

»Objects are made from multiple materials or as composites.

»Since usually only a single unit is produced, the costs can be kept down to a bare minimum.

Basically, rapid technology prototyping takes traditional 2 dimensional printing and adds a third dimension to it. Therefore, rapid prototyping machines are fondly called 3 dimensional printers. Rapid technology prototyping takes a Computer-Aided Design (CAD) model and using a laser, creates a physical model out of a variety of media. The media types include paper, ceramic material, wax, or even plastic.

In contrast with most machining processes, rapid technology prototyping is an “additive” technique. This means layers of media (whether paper, ceramic, wax or plastic) are combined to create a 3-D solid object. Most machining processes, such as drilling and grinding, are “subtractive” techniques, where material is removed from a solid block.

The process of rapid technology prototyping is listed out below …

»First, you need a CAD model of your invention.

»Next, the CAD model must be converted to STL (stereolithography) format. This file represents your invention as a series of triangles like that of a cut diamond. STL does not represent curved surfaces, only cut surfaces. However, you can create what appear to be curved surfaces by increasing the number of triangles.

»The STL file will need to be sliced into layers from 0.01 mm to 0.07 mm thick, depending on the build technique you choose.

»Construction of the object takes place layer by layer. The rapid technology prototyping machine builds the

How To Take The Strain Out Of Looking For Office Space
We’ve all been there, last minute meeting and no meeting space, new project and no desks for the team… finding extra office space is a nightmare. There are endless business centres to turn to, and what should be a simple job ends up taking day after day of your valuable time. That’s where using an office finding service can help.Similar to how you use a comparative online service, like Kelkoo to compare costs when shopping for books, CDs, travel, computing etc., an office finding service will

m fabrication, layered manufacturing, or computer automated manufacturing.

The benefits of using rapid technology prototyping are…

»Any object of any complexity can be formed fairly easily and quickly without the need for machine setup or assembly.

»Objects are made from multiple materials or as composites.

»Since usually only a single unit is produced, the costs can be kept down to a bare minimum.

Here’s a brief explanation of how it works…

Basically, rapid technology prototyping takes traditional 2 dimensional printing and adds a third dimension to it. Therefore, rapid prototyping machines are fondly called 3 dimensional printers. Rapid technology prototyping takes a Computer-Aided Design (CAD) model and using a laser, creates a physical model out of a variety of media. The media types include paper, ceramic material, wax, or even plastic.

In contrast with most machining processes, rapid technology prototyping is an “additive” technique. This means layers of media (whether paper, ceramic, wax or plastic) are combined to create a 3-D solid object. Most machining processes, such as drilling and grinding, are “subtractive” techniques, where material is removed from a solid block.

The process of rapid technology prototyping is listed out below …

»First, you need a CAD model of your invention.

»Next, the CAD model must be converted to STL (stereolithography) format. This file represents your invention as a series of triangles like that of a cut diamond. STL does not represent curved surfaces, only cut surfaces. However, you can create what appear to be curved surfaces by increasing the number of triangles.

»The STL file will need to be sliced into layers from 0.01 mm to 0.07 mm thick, depending on the build technique you choose.

»Construction of the object takes place layer by layer. The rapid technology prototyping machine builds the

Medical Billing - GU0 Record Fields 69 Through 72
While it seems like we would never come to the end of our medical billing series on electronic billing using NSF 3.01 specifications and the GU0 record, we have finally come to the last few fields. In this installment, we introduct a new CMN field type with its own special rules for filling it out, as if things weren't complicated enough already. We pick up our review of the GU0 record with field number 69.Before we start our review of the field itself, we need to discuss the actual data ty

how it works…

Basically, rapid technology prototyping takes traditional 2 dimensional printing and adds a third dimension to it. Therefore, rapid prototyping machines are fondly called 3 dimensional printers. Rapid technology prototyping takes a Computer-Aided Design (CAD) model and using a laser, creates a physical model out of a variety of media. The media types include paper, ceramic material, wax, or even plastic.

In contrast with most machining processes, rapid technology prototyping is an “additive” technique. This means layers of media (whether paper, ceramic, wax or plastic) are combined to create a 3-D solid object. Most machining processes, such as drilling and grinding, are “subtractive” techniques, where material is removed from a solid block.

The process of rapid technology prototyping is listed out below …

»First, you need a CAD model of your invention.

»Next, the CAD model must be converted to STL (stereolithography) format. This file represents your invention as a series of triangles like that of a cut diamond. STL does not represent curved surfaces, only cut surfaces. However, you can create what appear to be curved surfaces by increasing the number of triangles.

»The STL file will need to be sliced into layers from 0.01 mm to 0.07 mm thick, depending on the build technique you choose.

»Construction of the object takes place layer by layer. The rapid technology prototyping machine builds the

Funny Signs
Market trends reveal that creative advertising is the need of the hour. Striking logos and funny phrases increase consumers' curiosity. Some firms believe that they can capture the attention of their customers through humor. Many companies use this market psychology effectively through their neon signs. Most businesses believe in promoting and maintaining brand equity because an established funny phrase or picture helps people relate to a particular product or company.Many funny signboards us

prototyping is an “additive” technique. This means layers of media (whether paper, ceramic, wax or plastic) are combined to create a 3-D solid object. Most machining processes, such as drilling and grinding, are “subtractive” techniques, where material is removed from a solid block.

The process of rapid technology prototyping is listed out below …

»First, you need a CAD model of your invention.

»Next, the CAD model must be converted to STL (stereolithography) format. This file represents your invention as a series of triangles like that of a cut diamond. STL does not represent curved surfaces, only cut surfaces. However, you can create what appear to be curved surfaces by increasing the number of triangles.

»The STL file will need to be sliced into layers from 0.01 mm to 0.07 mm thick, depending on the build technique you choose.

»Construction of the object takes place layer by layer. The rapid technology prototyping machine builds the

Home and Office Bottled Water Delivery in Northern Virginia
Throughout the United States many consumers and businesses are electing to purchase bottled drinking water instead of tap or well water. The trend is clearly on the rise. A recent study of the bottled water industry indicates that U.S. bottled water sales and consumption continue to multiply at double digit rates as consumers and businesses increasingly choose bottled water as a beverage of choice. (Source: International Bottle Water Association Press Release dated April 13, 2006, http://www.bottle

phy) format. This file represents your invention as a series of triangles like that of a cut diamond. STL does not represent curved surfaces, only cut surfaces. However, you can create what appear to be curved surfaces by increasing the number of triangles.

»The STL file will need to be sliced into layers from 0.01 mm to 0.07 mm thick, depending on the build technique you choose.

»Construction of the object takes place layer by layer. The rapid technology prototyping machine builds the layers from the selected media.

»The final step is to clean and finish the prototype. In many instances, it will be sanded, polished or painted.

What is it used for?
Rapid technology prototyping is commonly used by inventors to help communicate their invention to a patent attorney or a trade representative. It may also be used for gaining manufacturing quotes, trying to sway investors and in marketing focus groups. As you can imagine, it is much easier to communicate an invention using a 3-D prototype than with a 2-D drawing or blueprint.

What does it cost?
Of course, costs range due to the complexity and size of your invention. They can also increase if you need additional design work such as painting done. Smaller prototypes can be made using rapid technology prototyping for about $250. You can gain an estimate by calling several companies.

There are limitations to rapid technology prototyping, but it truly is revolutionary. In the past, inventors had to wait weeks, sometimes up to months and pay much higher fees to have a single prototype made.

It is also possible to use rapid technology prototyping for making tools. This technique is known as rapid tooling. In addition, it can even be used for the production of parts and manufactures, known as rapid manufacturing.

Please visit www.PatentYourInventions.com to learn more about patenting, prototyping and marketing your invention.